### CMD echo hostname LiMe-03dbc3 hostname LiMe-03dbc3 ### CMD date '+%Y-%m-%d %H:%M:%S' 2025-12-26 11:52:19 ### CMD uptime 11:52:19 up 5 min, load average: 0.04, 0.05, 0.01 ### FILE /etc/board.json { "model": { "id": "asustek-computer-inc-p5q", "name": "ASUSTeK Computer INC. P5Q" }, "network": { "lan": { "device": "eth0", "protocol": "static" } } } ### FILE /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping : 6 microcode : 0x60b cpu MHz : 2000.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm pti tpr_shadow vnmi flexpriority vpid dtherm vmx flags : vnmi flexpriority tsc_offset vtpr vapic bogomips : 5999.04 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping : 6 microcode : 0x60b cpu MHz : 2838.349 cache size : 6144 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm pti tpr_shadow vnmi flexpriority vpid dtherm vmx flags : vnmi flexpriority tsc_offset vtpr vapic bogomips : 5999.04 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: ### FILE /etc/lime_release LIME_ID="LiMe" LIME_RELEASE="2024.1" LIME_CODENAME="2024.1 Fantastic Forwarder" LIME_BRANCH="(HEAD detached at v2024.1)" LIME_REVISION="a9488ae" LIME_DESCRIPTION="LiMe 2024.1 2024.1 Fantastic Forwarder ((HEAD detached at v2024.1) rev. a9488ae 20250122_2152)" LIME_BUILDDATE="20250122_2152" ### FILE /etc/openwrt_release DISTRIB_ID='LiMe' DISTRIB_RELEASE='2024.1' DISTRIB_REVISION='a9488ae' DISTRIB_TARGET='x86/64' DISTRIB_ARCH='x86_64' DISTRIB_DESCRIPTION='LiMe 2024.1 2024.1 Fantastic Forwarder ((HEAD detached at v2024.1) rev. a9488ae 20250122_2152)' DISTRIB_TAINTS='' ### FILE /etc/openwrt_version r24106-10cc5fcd00 ### FILE /etc/config/lime-node # Read the documentation in /docs directory # and on http://libremesh.org ### System options config lime system ### Network general option config lime network ### WiFi general options config lime wifi ### FILE /etc/config/lime-community # Read the documentation in /docs directory # and on http://libremesh.org ### System options config lime system ### Network general option config lime network ### WiFi general options config lime wifi ### FILE /etc/config/lime-defaults # Beware this file is NOT supposed to be edited by the end user, modify /etc/config/lime-node instead # If the same option or list is defined both in /etc/config/lime-node and lime-community file, the former will prevail # Beware this file is not supposed to store interface specific configuration, like "config net eth0" # Read the documentation in /docs directory # and on http://libremesh.org config lime system option hostname 'LiMe-%M4%M5%M6' option domain 'thisnode.info' option keep_on_upgrade 'libremesh dropbear minimum-essential /etc/sysupgrade.conf' option deferrable_reboot_uptime_s '97200' option deferrable_reboot_ping_target '4.2.2.2' option firstbootwizard_configured false option firstbootwizard_dismissed false config lime network option primary_interface 'eth0' option main_ipv4_address '10.%N1.0.0/16' option anygw_dhcp_start '2' option anygw_dhcp_limit '0' option main_ipv6_address 'fd%N1:%N2%N3:%N4%N5::/64' list protocols ieee80211s list protocols lan list protocols anygw list protocols batadv:%N1 list protocols bmx6:13 list protocols olsr:14 list protocols olsr6:15 list protocols olsr2:16 list protocols babeld:17 list protocols bmx7:18 list resolvers 4.2.2.2 # b.resolvers.Level3.net list resolvers 141.1.1.1 # cns1.cw.net list resolvers 2001:470:20::2 # ordns.he.net option bmx6_mtu '1500' option bmx6_publish_ownip false option bmx6_over_batman false option bmx6_pref_gw none option bmx6_wifi_rate_max 54000000 option bmx7_mtu '1500' option bmx7_publish_ownip false option bmx7_over_batman false option bmx7_pref_gw none option bmx7_wifi_rate_max 'auto' option bmx7_enable_pki false option batadv_orig_interval '2000' option batadv_routing_algo 'BATMAN_IV' option anygw_mac "aa:aa:aa:%N1:%N2:aa" option use_odhcpd false config lime wifi list modes 'ap' list modes 'apname' list modes 'ieee80211s' option ap_ssid 'LibreMesh.org' option apname_ssid 'LibreMesh.org/%H' option adhoc_ssid 'LiMe' option adhoc_bssid 'ca:fe:00:c0:ff:ee' option ieee80211s_mesh_fwding '0' option ieee80211s_mesh_id 'LiMe' option unstuck_interval '10' option unstuck_timeout '300' config lime-wifi-band '2ghz' option channel '11' option htmode 'HT20' option distance '1000' option adhoc_mcast_rate '24000' option ieee80211s_mcast_rate '24000' config lime-wifi-band '5ghz' list channel '48' list channel '157' option htmode 'HT40' option distance '10000' option adhoc_mcast_rate '6000' option ieee80211s_mcast_rate '6000' config generic_uci_config uhttpd_https list uci_set 'uhttpd.main.redirect_https=0' ### FILE /etc/config/lime-autogen # DO NOT EDIT THIS FILE!. This is autogenerated by lime-config! # Instead please edit /etc/config/lime-node and/or /etc/config/lime-community files # and then regenerate this file executing lime-config config lime-wifi-band '5ghz' option distance '10000' list channel '48' list channel '157' option adhoc_mcast_rate '6000' option htmode 'HT40' option ieee80211s_mcast_rate '6000' config lime 'network' option bmx6_publish_ownip 'false' option bmx6_wifi_rate_max '54000000' option main_ipv4_address '10.%N1.0.0/16' list resolvers '4.2.2.2' list resolvers '141.1.1.1' list resolvers '2001:470:20::2' option bmx6_mtu '1500' option bmx7_pref_gw 'none' option batadv_orig_interval '2000' option bmx6_pref_gw 'none' option main_ipv6_address 'fd%N1:%N2%N3:%N4%N5::/64' option use_odhcpd 'false' option bmx6_over_batman 'false' option anygw_mac 'aa:aa:aa:%N1:%N2:aa' option primary_interface 'eth0' option bmx7_enable_pki 'false' option batadv_routing_algo 'BATMAN_IV' option bmx7_publish_ownip 'false' option anygw_dhcp_limit '0' option bmx7_mtu '1500' option bmx7_wifi_rate_max 'auto' list protocols 'ieee80211s' list protocols 'lan' list protocols 'anygw' list protocols 'batadv:%N1' list protocols 'bmx6:13' list protocols 'olsr:14' list protocols 'olsr6:15' list protocols 'olsr2:16' list protocols 'babeld:17' list protocols 'bmx7:18' option anygw_dhcp_start '2' option bmx7_over_batman 'false' config generic_uci_config 'uhttpd_https' list uci_set 'uhttpd.main.redirect_https=0' config lime-wifi-band '2ghz' option distance '1000' option channel '11' option adhoc_mcast_rate '24000' option htmode 'HT20' option ieee80211s_mcast_rate '24000' config lime 'wifi' option apname_ssid 'LibreMesh.org/%H' option ap_ssid 'LibreMesh.org' option ieee80211s_mesh_id 'LiMe' option unstuck_timeout '300' option unstuck_interval '10' option ieee80211s_mesh_fwding '0' option adhoc_bssid 'ca:fe:00:c0:ff:ee' list modes 'ap' list modes 'apname' list modes 'ieee80211s' option adhoc_ssid 'LiMe' config lime 'system' option deferrable_reboot_ping_target '4.2.2.2' option firstbootwizard_dismissed 'false' option domain 'thisnode.info' option keep_on_upgrade 'libremesh dropbear minimum-essential /etc/sysupgrade.conf' option firstbootwizard_configured 'false' option deferrable_reboot_uptime_s '97200' option hostname 'LiMe-%M4%M5%M6' ### FILE /etc/config/network config interface 'loopback' option device 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' config device option name 'br-lan' option type 'bridge' list ports 'bat0' list ports 'eth0' config interface 'lan' option device 'br-lan' option proto 'static' option ipaddr '10.13.219.195' option netmask '255.255.0.0' option ip6assign '60' option ip6addr 'fd0d:fe46:8ce8::3:dbc3/64' option mtu '1500' config interface 'bat0' option proto 'batadv' option routing_algo 'BATMAN_IV' option bridge_loop_avoidance '1' option multicast_mode '0' option orig_interval '2000' option distributed_arp_table '0' option gw_mode 'client' config device 'lm_net_br_lan_anygw_dev' option type 'macvlan' option name 'anygw' option ifname 'br-lan' option macaddr 'aa:aa:aa:0d:fe:aa' config interface 'lm_net_br_lan_anygw_if' option proto 'static' option device 'anygw' option auto '1' option ipaddr '10.13.0.1' option ip6addr 'fd0d:fe46:8ce8::1/64' option metric '2147483647' option netmask '255.255.0.0' config rule6 'lm_net_anygw_rule6' option src 'fd0d:fe46:8ce8::1/128' option lookup '170' config route6 'lm_net_anygw_route6' option interface 'lm_net_br_lan_anygw_if' option target 'fd0d:fe46:8ce8::/64' option table '170' config rule 'lm_net_anygw_rule4' option src '10.13.0.1/32' option lookup '170' config route 'lm_net_anygw_route4' option interface 'lm_net_br_lan_anygw_if' option target '10.13.0.0' option netmask '255.255.0.0' option table '170' config interface 'lm_net_wlan0_mesh' option proto 'none' option mtu '1536' option auto '1' config device 'lm_net_wlan0_mesh_batadv_dev' option type '8021ad' option name 'wlan0-mesh_29' option ifname '@lm_net_wlan0_mesh' option vid '29' option macaddr '02:58:47:03:db:c3' option mtu '1532' config interface 'lm_net_wlan0_mesh_batadv_if' option proto 'batadv_hardif' option auto '1' option device 'wlan0-mesh_29' option master 'bat0' config device 'lm_net_wlan0_mesh_babeld_dev' option type '8021ad' option name 'wlan0-mesh_17' option ifname '@lm_net_wlan0_mesh' option vid '17' config interface 'lm_net_wlan0_mesh_babeld_if' option proto 'static' option auto '1' option device 'wlan0-mesh_17' option ipaddr '10.13.219.195' option netmask '255.255.255.255' config interface 'lm_net_wlan1_mesh' option proto 'none' option mtu '1536' option auto '1' config device 'lm_net_wlan1_mesh_batadv_dev' option type '8021ad' option name 'wlan1-mesh_29' option ifname '@lm_net_wlan1_mesh' option vid '29' option macaddr '02:ab:46:03:db:c3' option mtu '1532' config interface 'lm_net_wlan1_mesh_batadv_if' option proto 'batadv_hardif' option auto '1' option device 'wlan1-mesh_29' option master 'bat0' config device 'lm_net_wlan1_mesh_babeld_dev' option type '8021ad' option name 'wlan1-mesh_17' option ifname '@lm_net_wlan1_mesh' option vid '17' config interface 'lm_net_wlan1_mesh_babeld_if' option proto 'static' option auto '1' option device 'wlan1-mesh_17' option ipaddr '10.13.219.195' option netmask '255.255.255.255' config device 'lm_net_eth0_batadv_dev' option type '8021ad' option name 'eth0_29' option ifname 'eth0' option vid '29' option macaddr '02:95:39:03:db:c3' option mtu '1496' config interface 'lm_net_eth0_batadv_if' option proto 'batadv_hardif' option auto '1' option device 'eth0_29' option master 'bat0' config device 'lm_net_eth0_babeld_dev' option type '8021ad' option name 'eth0_17' option ifname 'eth0' option vid '17' option mtu '1496' config interface 'lm_net_eth0_babeld_if' option proto 'static' option auto '1' option device 'eth0_17' option ipaddr '10.13.219.195' option netmask '255.255.255.255' ### FILE /etc/config/wireless config wifi-device 'radio0' option type 'mac80211' option path 'pci0000:00/0000:00:1c.1/0000:03:00.0' option channel '48' option band '5g' option htmode 'HT40' option disabled '0' option distance '10000' option noscan '1' config wifi-device 'radio1' option type 'mac80211' option path 'pci0000:00/0000:00:1e.0/0000:05:02.0' option channel '11' option band '2g' option htmode 'HT20' option disabled '0' option distance '1000' option noscan '1' config wifi-iface 'lm_wlan0_ap_radio0' option mode 'ap' option device 'radio0' option ifname 'wlan0-ap' option network 'lan' option ssid 'LibreMesh.org' config wifi-iface 'lm_wlan0_apname_radio0' option mode 'ap' option device 'radio0' option ifname 'wlan0-apname' option network 'lan' option ssid 'LibreMesh.org/LiMe-03dbc3' config wifi-iface 'lm_wlan0_mesh_radio0' option mode 'mesh' option device 'radio0' option ifname 'wlan0-mesh' option network 'lm_net_wlan0_mesh' option mcast_rate '6000' option mesh_fwding '0' option mesh_id 'LiMe' config wifi-iface 'lm_wlan1_ap_radio1' option mode 'ap' option device 'radio1' option ifname 'wlan1-ap' option network 'lan' option ssid 'LibreMesh.org' config wifi-iface 'lm_wlan1_apname_radio1' option mode 'ap' option device 'radio1' option ifname 'wlan1-apname' option network 'lan' option ssid 'LibreMesh.org/LiMe-03dbc3' config wifi-iface 'lm_wlan1_mesh_radio1' option mode 'mesh' option device 'radio1' option ifname 'wlan1-mesh' option network 'lm_net_wlan1_mesh' option mcast_rate '24000' option mesh_fwding '0' option mesh_id 'LiMe' ### CMD dmesg [ 0.000000] Linux version 5.15.167 (builder@buildhost) (x86_64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r24106-10cc5fcd00) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Mon Sep 23 12:34:46 2024 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=a21fa13b-02 rootwait console=tty0 console=ttyS0,115200n8 noinitrd [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff6ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cff70000-0x00000000cff7dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cff7e000-0x00000000cffcffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer P5Q/P5Q, BIOS 0703 06/12/2008 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2999.520 MHz processor [ 0.000879] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000882] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000887] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.002149] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002755] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.002763] last_pfn = 0xcff70 max_arch_pfn = 0x400000000 [ 0.013297] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.013718] ACPI: Early table checksum verification disabled [ 0.013722] ACPI: RSDP 0x00000000000FAF00 000014 (v00 ACPIAM) [ 0.013727] ACPI: RSDT 0x00000000CFF70000 000040 (v01 A_M_I_ OEMRSDT 06000812 MSFT 00000097) [ 0.013733] ACPI: FACP 0x00000000CFF70200 000084 (v02 A_M_I_ OEMFACP 06000812 MSFT 00000097) [ 0.013739] ACPI: DSDT 0x00000000CFF70440 009647 (v01 A0993 A0993001 00000001 INTL 20060113) [ 0.013743] ACPI: FACS 0x00000000CFF7E000 000040 [ 0.013747] ACPI: APIC 0x00000000CFF70390 00006C (v01 A_M_I_ OEMAPIC 06000812 MSFT 00000097) [ 0.013751] ACPI: MCFG 0x00000000CFF70400 00003C (v01 A_M_I_ OEMMCFG 06000812 MSFT 00000097) [ 0.013755] ACPI: OEMB 0x00000000CFF7E040 000081 (v01 A_M_I_ AMI_OEM 06000812 MSFT 00000097) [ 0.013759] ACPI: HPET 0x00000000CFF79A90 000038 (v01 A_M_I_ OEMHPET 06000812 MSFT 00000097) [ 0.013763] ACPI: OSFR 0x00000000CFF79AD0 0000B0 (v01 A_M_I_ OEMOSFR 06000812 MSFT 00000097) [ 0.013767] ACPI: SSDT 0x00000000CFF7EB20 000A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.013770] ACPI: Reserving FACP table memory at [mem 0xcff70200-0xcff70283] [ 0.013772] ACPI: Reserving DSDT table memory at [mem 0xcff70440-0xcff79a86] [ 0.013774] ACPI: Reserving FACS table memory at [mem 0xcff7e000-0xcff7e03f] [ 0.013775] ACPI: Reserving APIC table memory at [mem 0xcff70390-0xcff703fb] [ 0.013777] ACPI: Reserving MCFG table memory at [mem 0xcff70400-0xcff7043b] [ 0.013778] ACPI: Reserving OEMB table memory at [mem 0xcff7e040-0xcff7e0c0] [ 0.013780] ACPI: Reserving HPET table memory at [mem 0xcff79a90-0xcff79ac7] [ 0.013782] ACPI: Reserving OSFR table memory at [mem 0xcff79ad0-0xcff79b7f] [ 0.013783] ACPI: Reserving SSDT table memory at [mem 0xcff7eb20-0xcff7f59b] [ 0.013806] Zone ranges: [ 0.013808] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.013810] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.013812] Normal [mem 0x0000000100000000-0x000000012fffffff] [ 0.013814] Movable zone start for each node [ 0.013815] Early memory node ranges [ 0.013816] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.013818] node 0: [mem 0x0000000000100000-0x00000000cff6ffff] [ 0.013819] node 0: [mem 0x0000000100000000-0x000000012fffffff] [ 0.013821] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff] [ 0.013828] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.013872] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.034573] On node 0, zone Normal: 144 pages in unavailable ranges [ 0.034718] ACPI: PM-Timer IO Port: 0x808 [ 0.034736] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.034740] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.034743] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.034747] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.034749] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.034755] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.034768] [mem 0xd0000000-0xfedfffff] available for PCI devices [ 0.034770] Booting paravirtualized kernel on bare hardware [ 0.034774] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.034780] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.035373] percpu: Embedded 45 pages/cpu s146008 r8192 d30120 u524288 [ 0.035379] pcpu-alloc: s146008 r8192 d30120 u524288 alloc=1*2097152 [ 0.035382] pcpu-alloc: [0] 0 1 2 3 [ 0.035402] Built 1 zonelists, mobility grouping on. Total pages: 1031794 [ 0.035405] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=a21fa13b-02 rootwait console=tty0 console=ttyS0,115200n8 noinitrd [ 0.036427] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.036890] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.036940] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.102409] Memory: 4029084K/4193336K available (14337K kernel code, 1154K rwdata, 2428K rodata, 1608K init, 1212K bss, 163996K reserved, 0K cma-reserved) [ 0.102733] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.102749] Kernel/User page tables isolation: enabled [ 0.102862] rcu: Hierarchical RCU implementation. [ 0.102864] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.102866] Tracing variant of Tasks RCU enabled. [ 0.102868] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.102869] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.102878] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 [ 0.104245] Console: colour VGA+ 80x25 [ 0.106578] printk: console [tty0] enabled [ 0.125495] printk: console [ttyS0] enabled [ 0.125668] ACPI: Core revision 20210730 [ 0.125923] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.126266] APIC: Switch to symmetric I/O mode setup [ 0.126806] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.176267] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3c7fe221e, max_idle_ns: 440795202126 ns [ 0.176643] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.04 BogoMIPS (lpj=29995200) [ 0.177041] CPU0: Thermal monitoring enabled (TM2) [ 0.177240] process: using mwait in idle threads [ 0.177424] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.177632] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.177865] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.178175] Spectre V2 : Mitigation: Retpolines [ 0.178353] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.178654] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.179082] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.179324] MMIO Stale Data: Unknown: No mitigations [ 0.179518] x86/fpu: x87 FPU will use FXSAVE [ 0.197370] Freeing SMP alternatives memory: 44K [ 0.197558] pid_max: default: 32768 minimum: 301 [ 0.197863] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.198148] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.331874] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0x6) [ 0.332416] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.332716] ... version: 2 [ 0.332877] ... bit width: 40 [ 0.333040] ... generic registers: 2 [ 0.333200] ... value mask: 000000ffffffffff [ 0.333403] ... max period: 000000007fffffff [ 0.333605] ... fixed-purpose events: 3 [ 0.333765] ... event mask: 0000000700000003 [ 0.334057] signal: max sigframe size: 1040 [ 0.334248] rcu: Hierarchical SRCU implementation. [ 0.334535] smp: Bringing up secondary CPUs ... [ 0.334813] x86: Booting SMP configuration: [ 0.334981] .... node #0, CPUs: #1 [ 0.336643] smp: Brought up 1 node, 2 CPUs [ 0.336643] smpboot: Max logical packages: 2 [ 0.336643] smpboot: Total of 2 processors activated (11998.08 BogoMIPS) [ 0.336643] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.336643] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.336668] pinctrl core: initialized pinctrl subsystem [ 0.337126] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.337549] thermal_sys: Registered thermal governor 'step_wise' [ 0.337551] thermal_sys: Registered thermal governor 'user_space' [ 0.337814] cpuidle: using governor ladder [ 0.338246] ACPI: bus type PCI registered [ 0.338408] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.338696] PCI: Using configuration type 1 for base access [ 0.341403] cryptd: max_cpu_qlen set to 1000 [ 0.341793] ACPI: Added _OSI(Module Device) [ 0.341793] ACPI: Added _OSI(Processor Device) [ 0.341793] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.341793] ACPI: Added _OSI(Processor Aggregator Device) [ 0.341793] ACPI: Added _OSI(Linux-Dell-Video) [ 0.341793] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.341793] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.341793] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.350028] ACPI: Dynamic OEM Table Load: [ 0.350028] ACPI: SSDT 0xFFFF88810034E800 000277 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.350028] ACPI: Dynamic OEM Table Load: [ 0.350028] ACPI: SSDT 0xFFFF888100337000 0004B2 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.350028] ACPI: Dynamic OEM Table Load: [ 0.350028] ACPI: SSDT 0xFFFF88810034C000 000277 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 0.350029] ACPI: Dynamic OEM Table Load: [ 0.350029] ACPI: SSDT 0xFFFF8881001CF240 000085 (v01 PmRef P002Cst 00003000 INTL 20060113) [ 0.350029] ACPI: Interpreter enabled [ 0.350029] ACPI: PM: (supports S0 S5) [ 0.350029] ACPI: Using IOAPIC for interrupt routing [ 0.350029] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.350029] ACPI: Enabled 15 GPEs in block 00 to 3F [ 0.354489] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.354725] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3] [ 0.355012] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.355453] PCI host bridge to bus 0000:00 [ 0.355618] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.355870] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.356121] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.356397] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.356646] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window] [ 0.356923] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.357163] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000 [ 0.357405] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset [ 0.357679] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability [ 0.358039] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400 [ 0.358296] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.358656] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.358914] pci 0000:00:1a.0: reg 0x20: [io 0xc800-0xc81f] [ 0.359271] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.359529] pci 0000:00:1a.1: reg 0x20: [io 0xc880-0xc89f] [ 0.359878] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.360137] pci 0000:00:1a.2: reg 0x20: [io 0xcc00-0xcc1f] [ 0.360494] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.360733] pci 0000:00:1a.7: reg 0x10: [mem 0xfe7ffc00-0xfe7fffff] [ 0.361035] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.361360] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.361599] pci 0000:00:1b.0: reg 0x10: [mem 0xfe7f8000-0xfe7fbfff 64bit] [ 0.361903] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.362252] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.362535] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.362881] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400 [ 0.363164] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.363514] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 [ 0.363796] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.364145] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.364403] pci 0000:00:1d.0: reg 0x20: [io 0xc080-0xc09f] [ 0.364757] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.365016] pci 0000:00:1d.1: reg 0x20: [io 0xc400-0xc41f] [ 0.365368] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.365626] pci 0000:00:1d.2: reg 0x20: [io 0xc480-0xc49f] [ 0.365983] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.366221] pci 0000:00:1d.7: reg 0x10: [mem 0xfe7ff800-0xfe7ffbff] [ 0.366523] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.366762] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.367145] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 0.367437] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.367730] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.367993] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.368274] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) [ 0.368688] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f [ 0.368923] pci 0000:00:1f.2: reg 0x10: [io 0xb000-0xb007] [ 0.369140] pci 0000:00:1f.2: reg 0x14: [io 0xac00-0xac03] [ 0.369356] pci 0000:00:1f.2: reg 0x18: [io 0xa880-0xa887] [ 0.369572] pci 0000:00:1f.2: reg 0x1c: [io 0xa800-0xa803] [ 0.369788] pci 0000:00:1f.2: reg 0x20: [io 0xa480-0xa48f] [ 0.370004] pci 0000:00:1f.2: reg 0x24: [io 0xa400-0xa40f] [ 0.370327] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.370565] pci 0000:00:1f.3: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff 64bit] [ 0.370831] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.371165] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185 [ 0.371400] pci 0000:00:1f.5: reg 0x10: [io 0xc000-0xc007] [ 0.371617] pci 0000:00:1f.5: reg 0x14: [io 0xbc00-0xbc03] [ 0.371833] pci 0000:00:1f.5: reg 0x18: [io 0xb880-0xb887] [ 0.372049] pci 0000:00:1f.5: reg 0x1c: [io 0xb800-0xb803] [ 0.372265] pci 0000:00:1f.5: reg 0x20: [io 0xb480-0xb48f] [ 0.372481] pci 0000:00:1f.5: reg 0x24: [io 0xb400-0xb40f] [ 0.372812] pci 0000:01:00.0: [1002:9442] type 00 class 0x030000 [ 0.373050] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.373325] pci 0000:01:00.0: reg 0x18: [mem 0xfe8e0000-0xfe8effff 64bit] [ 0.373580] pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff] [ 0.373801] pci 0000:01:00.0: reg 0x30: [mem 0xfe8c0000-0xfe8dffff pref] [ 0.374053] pci 0000:01:00.0: enabling Extended Tags [ 0.374254] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.374577] pci 0000:01:00.0: supports D1 D2 [ 0.374794] pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300 [ 0.375031] pci 0000:01:00.1: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit] [ 0.375307] pci 0000:01:00.1: enabling Extended Tags [ 0.375524] pci 0000:01:00.1: supports D1 D2 [ 0.375737] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 0.376086] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.376279] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.376645] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.376897] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.377219] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.377417] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.377745] pci 0000:03:00.0: [168c:0030] type 00 class 0x028000 [ 0.377992] pci 0000:03:00.0: reg 0x10: [mem 0xfeae0000-0xfeafffff 64bit] [ 0.378286] pci 0000:03:00.0: reg 0x30: [mem 0xfead0000-0xfeadffff pref] [ 0.378583] pci 0000:03:00.0: supports D1 [ 0.378744] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.379026] pci 0000:00:1c.1: ASPM: current common clock configuration is inconsistent, reconfiguring [ 0.406662] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.406870] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff] [ 0.407169] pci 0000:02:00.0: [1969:1026] type 00 class 0x020000 [ 0.407417] pci 0000:02:00.0: reg 0x10: [mem 0xfe9c0000-0xfe9fffff 64bit] [ 0.407677] pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f] [ 0.407935] pci 0000:02:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 0.408348] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.408623] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.408987] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.409181] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.409410] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.409676] pci_bus 0000:05: extended config space not accessible [ 0.409925] pci 0000:05:02.0: [168c:002d] type 00 class 0x028000 [ 0.410165] pci 0000:05:02.0: reg 0x10: [mem 0xfebf0000-0xfebfffff] [ 0.410463] pci 0000:05:02.0: PME# supported from D0 D3hot [ 0.410743] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.410998] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.411252] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.411561] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.411871] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.412203] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.412535] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode) [ 0.412884] pci_bus 0000:00: on NUMA node 0 [ 0.413399] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.413663] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.413927] ACPI: PCI: Interrupt link LNKC configured for IRQ 15 [ 0.414190] ACPI: PCI: Interrupt link LNKD configured for IRQ 5 [ 0.414450] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.414673] ACPI: PCI: Interrupt link LNKE disabled [ 0.414898] ACPI: PCI: Interrupt link LNKF configured for IRQ 14 [ 0.415162] ACPI: PCI: Interrupt link LNKG configured for IRQ 3 [ 0.415422] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 0.415737] iommu: Default domain type: Translated [ 0.415927] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.416268] SCSI subsystem initialized [ 0.422192] libata version 3.00 loaded. [ 0.422221] ACPI: bus type USB registered [ 0.422399] usbcore: registered new interface driver usbfs [ 0.422614] usbcore: registered new interface driver hub [ 0.422827] usbcore: registered new device driver usb [ 0.423036] pps_core: LinuxPPS API ver. 1 registered [ 0.423228] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.423562] PTP clock support registered [ 0.423906] PCI: Using ACPI for IRQ routing [ 0.424073] PCI: pci_cache_line_size set to 64 bytes [ 0.424119] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.424120] e820: reserve RAM buffer [mem 0xcff70000-0xcfffffff] [ 0.424139] hpet: 4 channels of 0 reserved for per-cpu timers [ 0.424139] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.424139] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.426643] clocksource: Switched to clocksource tsc-early [ 0.426643] pnp: PnP ACPI init [ 0.426643] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.426643] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.426643] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.426643] system 00:03: [io 0x0800-0x087f] has been reserved [ 0.426643] system 00:03: [io 0x0500-0x057f] could not be reserved [ 0.426643] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.426643] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.426643] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.426643] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.426643] system 00:04: [mem 0xffc00000-0xffefffff] has been reserved [ 0.426643] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.426643] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.426643] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.426643] pnp 00:08: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.426643] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.426643] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.426643] system 00:08: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.432280] pnp: PnP ACPI: found 9 devices [ 0.437844] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.438777] NET: Registered PF_INET protocol family [ 0.439064] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.439937] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.440255] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.440542] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.440884] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.441253] TCP: Hash tables configured (established 32768 bind 32768) [ 0.441527] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.441789] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.442104] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.442334] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.442635] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 0.443011] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.443310] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.443716] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.444127] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff] [ 0.444384] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.444673] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.444961] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.445193] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.445426] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.445619] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.445849] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.446100] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.446387] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.446580] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.446810] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff] [ 0.447063] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.447351] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.447543] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.447774] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff] [ 0.448027] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.448314] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.448507] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.448737] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.448990] pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.449278] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.449472] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.449727] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.449959] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.450190] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.450444] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.450697] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff window] [ 0.450951] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.451162] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.451396] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.451664] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.451875] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf01fffff] [ 0.452109] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.452378] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.452590] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.452824] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.453092] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.453303] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.453537] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.454344] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.454578] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.454809] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.455040] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.455293] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.455547] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff window] [ 0.456829] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.457077] PCI: CLS 32 bytes, default 64 [ 0.457243] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.457482] software IO TLB: mapped [mem 0x00000000cbf70000-0x00000000cff70000] (64MB) [ 0.458549] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.460232] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.460659] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.461193] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.461500] pcieport 0000:00:1c.1: enabling device (0106 -> 0107) [ 0.461904] hv_vmbus: registering driver hyperv_fb [ 0.462315] Monitor-Mwait will be used to enter C-1 state [ 0.462320] Monitor-Mwait will be used to enter C-2 state [ 0.462324] Monitor-Mwait will be used to enter C-3 state [ 0.462327] ACPI: \_PR_.P001: Found 3 idle states [ 0.462709] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.463043] ACPI: button: Power Button [PWRB] [ 0.463252] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.463563] ACPI: button: Power Button [PWRF] [ 0.463996] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.465240] Non-volatile memory driver v1.3 [ 0.465485] Linux agpgart interface v0.103 [ 0.465726] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.467576] loop: module loaded [ 0.467730] Guest personality initialized and is inactive [ 0.467949] VMCI host device registered (name=vmci, major=10, minor=127) [ 0.468197] Initialized host personality [ 0.468415] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20210730/utaddress-204) [ 0.468955] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.469213] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20210730/utaddress-204) [ 0.469751] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.470006] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20210730/utaddress-204) [ 0.470544] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.470799] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.471067] Loading iSCSI transport class v2.0-870. [ 0.471893] VMware PVSCSI driver - version 1.0.7.0-k [ 0.472104] hv_vmbus: registering driver hv_storvsc [ 0.472549] ata_piix 0000:00:1f.2: version 2.13 [ 0.472632] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.473143] scsi host0: ata_piix [ 0.473408] scsi host1: ata_piix [ 0.473580] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19 [ 0.473845] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19 [ 0.474166] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.474742] scsi host2: ata_piix [ 0.475041] scsi host3: ata_piix [ 0.475207] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 19 [ 0.475471] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 19 [ 0.475914] VMware vmxnet3 virtual NIC driver - version 1.6.0.0-k-NAPI [ 0.476171] hv_vmbus: registering driver hv_netvsc [ 0.476358] Fusion MPT base driver 3.04.20 [ 0.476521] Copyright (c) 1999-2008 LSI Corporation [ 0.476712] Fusion MPT SPI Host driver 3.04.20 [ 0.476897] Fusion MPT SAS Host driver 3.04.20 [ 0.477088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.477330] ehci-pci: EHCI PCI platform driver [ 0.477587] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.477797] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.478080] ehci-pci 0000:00:1a.7: debug port 1 [ 0.482157] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00 [ 0.502542] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.502876] hub 1-0:1.0: USB hub found [ 0.503037] hub 1-0:1.0: 6 ports detected [ 0.503416] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.503621] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.503901] ehci-pci 0000:00:1d.7: debug port 1 [ 0.507973] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800 [ 0.532537] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.532898] hub 2-0:1.0: USB hub found [ 0.533059] hub 2-0:1.0: 6 ports detected [ 0.533388] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.533624] ohci-pci: OHCI PCI platform driver [ 0.533808] ohci-platform: OHCI generic platform driver [ 0.534015] uhci_hcd: USB Universal Host Controller Interface driver [ 0.534308] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.534512] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.534809] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800 [ 0.535157] hub 3-0:1.0: USB hub found [ 0.535326] hub 3-0:1.0: 2 ports detected [ 0.535679] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.535883] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.536179] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880 [ 0.536549] hub 4-0:1.0: USB hub found [ 0.536715] hub 4-0:1.0: 2 ports detected [ 0.537056] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.537260] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.537550] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00 [ 0.538479] hub 5-0:1.0: USB hub found [ 0.538645] hub 5-0:1.0: 2 ports detected [ 0.538989] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.539193] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.539483] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080 [ 0.539848] hub 6-0:1.0: USB hub found [ 0.540013] hub 6-0:1.0: 2 ports detected [ 0.540355] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.540559] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.540849] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400 [ 0.541216] hub 7-0:1.0: USB hub found [ 0.541381] hub 7-0:1.0: 2 ports detected [ 0.541721] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.541925] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.542215] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480 [ 0.542591] hub 8-0:1.0: USB hub found [ 0.542756] hub 8-0:1.0: 2 ports detected [ 0.543098] usbcore: registered new interface driver usb-storage [ 0.543378] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.543631] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.544465] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.544890] rtc_cmos 00:01: RTC can wake from S4 [ 0.545252] rtc_cmos 00:01: registered as rtc0 [ 0.545450] rtc_cmos 00:01: setting system clock to 2025-12-26T11:47:10 UTC (1766749630) [ 0.545758] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.546050] fail to initialize ptp_kvm [ 0.546302] intel_pstate: CPU model not supported [ 0.546651] sdhci: Secure Digital Host Controller Interface driver [ 0.546882] sdhci: Copyright(c) Pierre Ossman [ 0.547377] hid: raw HID events driver (C) Jiri Kosina [ 0.547584] hv_vmbus: registering driver hid_hyperv [ 0.547784] usbcore: registered new interface driver usbhid [ 0.547995] usbhid: USB HID core driver [ 0.548155] hv_utils: Registering HyperV Utility Driver [ 0.548354] hv_vmbus: registering driver hv_utils [ 0.548537] hv_vmbus: registering driver hv_balloon [ 0.548901] NET: Registered PF_INET6 protocol family [ 0.549328] Segment Routing with IPv6 [ 0.549489] In-situ OAM (IOAM) with IPv6 [ 0.549669] NET: Registered PF_PACKET protocol family [ 0.549871] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.550349] 8021q: 802.1Q VLAN Support v1.8 [ 0.550557] NET: Registered PF_VSOCK protocol family [ 0.550908] microcode: sig=0x10676, pf=0x1, revision=0x60b [ 0.551122] microcode: Microcode Update Driver: v2.2. [ 0.551127] IPI shorthand broadcast: enabled [ 0.551506] sched_clock: Marking stable (527222758, 23568611)->(565857656, -15066287) [ 0.552204] clk: Disabling unused clocks [ 0.833148] ata4: SATA link down (SStatus 0 SControl 300) [ 0.982551] usb 8-2: new low-speed USB device number 2 using uhci_hcd [ 1.002598] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.012657] ata3.00: LPM support broken, forcing max_power [ 1.014102] ata3.00: ATA-6: WDC WD2000JD-00HBB0, 08.02D08, max UDMA/133 [ 1.014361] ata3.00: 390721968 sectors, multi 16: LBA48 [ 1.032661] ata3.00: LPM support broken, forcing max_power [ 1.034137] ata3.00: configured for UDMA/133 [ 1.163192] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.163416] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.174264] ata1.00: SATA link down (SStatus 0 SControl 300) [ 1.174488] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.174808] scsi 2:0:0:0: Direct-Access ATA WDC WD2000JD-00H 2D08 PQ: 0 ANSI: 5 [ 1.175332] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 1.175624] sd 2:0:0:0: [sda] Write Protect is off [ 1.175812] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.175841] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.179925] sda: sda1 sda2 [ 1.180194] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.187355] VFS: Mounted root (squashfs filesystem) readonly on device 8:2. [ 1.188154] Freeing unused kernel image (initmem) memory: 1608K [ 1.188404] Write protecting the kernel read-only data: 20480k [ 1.189300] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 1.190056] Freeing unused kernel image (rodata/data gap) memory: 1668K [ 1.190330] Run /sbin/init as init process [ 1.190493] with arguments: [ 1.190494] /sbin/init [ 1.190495] with environment: [ 1.190496] HOME=/ [ 1.190497] TERM=linux [ 1.190498] BOOT_IMAGE=/boot/vmlinuz [ 1.241992] input: Kensington Kensington Slimblade Trackball as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:047D:2041.0001/input/input3 [ 1.242504] hid-generic 0003:047D:2041.0001: input,hidraw0: USB HID v1.10 Mouse [Kensington Kensington Slimblade Trackball] on usb-0000:00:1d.2-2/input0 [ 1.270211] init: Console is alive [ 1.497237] tsc: Refined TSC clocksource calibration: 2999.666 MHz [ 1.497481] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3d09b8651, max_idle_ns: 440795214890 ns [ 1.497556] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 1.498106] clocksource: Switched to clocksource tsc [ 1.503066] Button Hotplug driver version 0.4.1 [ 1.504864] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.505071] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.505356] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 1.512107] init: - preinit - [ 1.638507] random: jshn: uninitialized urandom read (4 bytes read) [ 1.644583] random: jshn: uninitialized urandom read (4 bytes read) [ 1.646335] random: jshn: uninitialized urandom read (4 bytes read) [ 3.669266] random: jshn: uninitialized urandom read (4 bytes read) [ 3.675325] loop0: detected capacity change from 0 to 212992 [ 3.713587] loop0: detected capacity change from 212992 to 199552 [ 3.723915] random: procd: uninitialized urandom read (4 bytes read) [ 3.825721] EXT4-fs (loop0): recovery complete [ 3.839001] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 3.848997] mount_root: switching to ext4 overlay [ 3.858637] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 3.917719] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null). Quota mode: disabled. [ 3.922246] urandom-seed: Seeding with /etc/urandom.seed [ 3.973952] procd: - early - [ 4.509890] procd: - ubus - [ 4.538027] random: ubusd: uninitialized urandom read (4 bytes read) [ 4.561641] procd: - init - [ 4.671671] kmodloader: loading kernel modules from /etc/modules.d/* [ 4.690356] urngd: v1.0.2 started. [ 4.693531] e1000: Intel(R) PRO/1000 Network Driver [ 4.693762] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 4.695783] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 4.696013] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 4.696609] i2c_dev: i2c /dev entries driver [ 4.718987] random: crng init done [ 4.719131] random: 30 urandom warning(s) missed due to ratelimiting [ 4.844316] Loading modules backported from Linux version v6.1.110-0-g5f55cad62cc9d [ 4.844609] Backport generated by backports.git v6.1.110-1-0-g965f73fc [ 4.845798] e1000e: Intel(R) PRO/1000 Network Driver [ 4.845992] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.847155] Intel(R) 2.5G Ethernet Linux Driver [ 4.847336] Copyright(c) 2018 Intel Corporation. [ 4.872134] batman_adv: B.A.T.M.A.N. advanced 2023.1-openwrt-7 (compatibility version 15) loaded [ 4.953125] ath: EEPROM regdomain: 0x21 [ 4.953129] ath: EEPROM indicates we should expect a direct regpair map [ 4.953130] ath: Country alpha2 being used: BB [ 4.953131] ath: Regpair used: 0x21 [ 4.960309] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 4.983607] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0x000000003e535120, irq=17 [ 5.284801] ath: EEPROM regdomain: 0x809c [ 5.284805] ath: EEPROM indicates we should expect a country code [ 5.284806] ath: doing EEPROM country->regdmn map search [ 5.284807] ath: country maps to regdmn code: 0x52 [ 5.284808] ath: Country alpha2 being used: CN [ 5.284809] ath: Regpair used: 0x52 [ 5.299230] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 5.323701] ieee80211 phy1: Atheros AR9287 Rev:2 mem=0x000000001d4ae822, irq=18 [ 5.324190] kmodloader: done loading kernel modules from /etc/modules.d/* [ 6.403858] br-lan: port 1(eth0) entered blocking state [ 6.404068] br-lan: port 1(eth0) entered disabled state [ 6.404319] device eth0 entered promiscuous mode [ 6.405821] device br-lan entered promiscuous mode [ 6.454965] 8021q: adding VLAN 0 to HW filter on device bat0 [ 6.455271] br-lan: port 2(bat0) entered blocking state [ 6.455475] br-lan: port 2(bat0) entered disabled state [ 6.455712] device bat0 entered promiscuous mode [ 6.455913] br-lan: port 2(bat0) entered blocking state [ 6.456116] br-lan: port 2(bat0) entered forwarding state [ 6.456699] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 6.456979] IPv6: ADDRCONF(NETDEV_CHANGE): anygw: link becomes ready [ 6.963591] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled [ 6.963898] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled [ 7.537283] ATL1E 0000:02:00.0 eth0: NIC Link is Up <1000 Mbps Full Duplex> [ 7.537561] br-lan: port 1(eth0) entered blocking state [ 7.537765] br-lan: port 1(eth0) entered forwarding state [ 7.538029] IPv6: ADDRCONF(NETDEV_CHANGE): eth0_17: link becomes ready [ 7.538321] IPv6: ADDRCONF(NETDEV_CHANGE): eth0_29: link becomes ready [ 7.559651] batman_adv: bat0: Adding interface: eth0_29 [ 7.559860] batman_adv: bat0: The MTU of interface eth0_29 is too small (1496) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem. [ 7.560685] batman_adv: bat0: Interface activated: eth0_29 [ 38.540579] ATL1E 0000:02:00.0 eth0: NIC Link is Down [ 38.540852] br-lan: port 1(eth0) entered disabled state [ 38.545859] batman_adv: bat0: Interface deactivated: eth0_29 [ 38.546079] batman_adv: bat0: Removing interface: eth0_29 [ 41.466115] ATL1E 0000:02:00.0 eth0: NIC Link is Up <1000 Mbps Full Duplex> [ 41.466964] br-lan: port 1(eth0) entered blocking state [ 41.467167] br-lan: port 1(eth0) entered forwarding state [ 41.474674] batman_adv: bat0: Adding interface: eth0_29 [ 41.474881] batman_adv: bat0: The MTU of interface eth0_29 is too small (1496) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem. [ 41.475709] batman_adv: bat0: Interface activated: eth0_29 ### CMD batctl if eth0_29: active ### CMD batctl o [B.A.T.M.A.N. adv 2023.1-openwrt-7, MainIF/MAC: eth0_29/02:95:39:03:db:c3 (bat0/76:e0:ad:87:c5:b6 BATMAN_IV)] Originator last-seen (#/255) Nexthop [outgoingIF] ### CMD bmx6 -c show=status show=interfaces show=links show=originators show=tunnels /bin/lime-report: eval: line 13: bmx6: not found ### CMD bmx7 -c show=status show=interfaces show=links show=originators show=tunnels /bin/lime-report: eval: line 13: bmx7: not found ### CMD echo dump | nc ::1 30003 BABEL 1.0 version babeld-1.13.1-ubus-mod host LiMe-03dbc3 my-id 02:22:15:ff:fe:03:db:c3 ok add interface wlan0-mesh_17 up false add interface wlan1-mesh_17 up false add interface eth0_17 up true ipv6 fe80::222:15ff:fe03:dbc3 ipv4 10.13.219.195 add xroute fd0d:fe46:8ce8::/64-::/0 prefix fd0d:fe46:8ce8::/64 from ::/0 metric 0 add xroute 10.13.0.0/16-0.0.0.0/0 prefix 10.13.0.0/16 from 0.0.0.0/0 metric 0 ok ### CMD ubus call babeld get_info { "babeld-version": "babeld-1.13.1-ubus-mod", "my-id": "02:22:15:ff:fe:03:db:c3", "host": "LiMe-03dbc3" } ### CMD ubus call babeld get_neighbours { "IPv4": { }, "IPv6": { } } ### CMD ubus call babeld get_xroutes { "IPv4": { "10.13.0.0/16": { "src-prefix": "0.0.0.0/0", "metric": 0 } }, "IPv6": { "fd0d:fe46:8ce8::/64": { "src-prefix": "::/0", "metric": 0 } } } ### CMD ubus call babeld get_routes { "IPv4": { }, "IPv6": { } } ### CMD free total used free shared buff/cache available Mem: 4034704 41528 3970252 104 22924 3939040 Swap: 0 0 0 ### CMD ps PID USER VSZ STAT COMMAND 1 root 1276 S /sbin/procd 2 root 0 SW [kthreadd] 3 root 0 IW< [rcu_gp] 4 root 0 IW< [rcu_par_gp] 5 root 0 IW< [slub_flushwq] 6 root 0 IW< [netns] 8 root 0 IW< [kworker/0:0H-kb] 10 root 0 IW< [mm_percpu_wq] 11 root 0 SW [rcu_tasks_trace] 12 root 0 SW [ksoftirqd/0] 13 root 0 IW [rcu_sched] 14 root 0 SW [migration/0] 15 root 0 SW [cpuhp/0] 16 root 0 SW [cpuhp/1] 17 root 0 SW [migration/1] 18 root 0 SW [ksoftirqd/1] 20 root 0 IW< [kworker/1:0H-ev] 21 root 0 IW< [inet_frag_wq] 22 root 0 IW [kworker/0:1-eve] 23 root 0 SW [oom_reaper] 24 root 0 IW< [writeback] 25 root 0 SW [kcompactd0] 30 root 0 IW [kworker/1:1-eve] 31 root 0 IW< [pencrypt_serial] 32 root 0 IW< [pdecrypt_serial] 33 root 0 IW< [cryptd] 39 root 0 IW< [kintegrityd] 40 root 0 IW< [kblockd] 41 root 0 IW< [blkcg_punt_bio] 42 root 0 IW< [ata_sff] 43 root 0 SW [watchdogd] 44 root 0 IW [kworker/u8:1-ba] 45 root 0 IW< [kworker/1:1H-kb] 52 root 0 SW [kswapd0] 69 root 0 IW< [kthrotld] 73 root 0 IW [kworker/u8:2-ba] 109 root 0 IW< [acpi_thermal_pm] 186 root 0 IW< [iscsi_eh] 188 root 0 IW [kworker/u8:3-ev] 207 root 0 IW< [iscsi_conn_clea] 221 root 0 IW< [nvme-wq] 223 root 0 IW< [nvme-reset-wq] 225 root 0 IW< [nvme-delete-wq] 240 root 0 SW [scsi_eh_0] 241 root 0 IW< [scsi_tmf_0] 243 root 0 SW [scsi_eh_1] 246 root 0 IW< [scsi_tmf_1] 257 root 0 SW [scsi_eh_2] 258 root 0 IW< [scsi_tmf_2] 262 root 0 SW [scsi_eh_3] 263 root 0 IW< [scsi_tmf_3] 376 root 0 IW< [mld] 377 root 0 IW< [ipv6_addrconf] 378 root 0 IW< [kstrp] 388 root 0 IW [kworker/1:2-eve] 398 root 0 IW< [kworker/0:1H-kb] 506 root 0 SW [jbd2/loop0-8] 507 root 0 IW< [ext4-rsv-conver] 535 root 0 IW< [ext4-rsv-conver] 674 ubus 976 S /sbin/ubusd 676 root 764 S /sbin/askfirst /usr/libexec/login.sh 711 root 832 S /sbin/urngd 788 root 0 IW< [ena] 800 root 0 IW< [ixgbe] 814 root 0 IW< [cfg80211] 815 root 0 IW [kworker/0:3-eve] 866 root 0 IW< [bat_events] 1093 logd 1008 S /sbin/logd -S 64 1147 root 1920 S /sbin/rpcd -s /var/run/ubus/ubus.sock -t 30 1371 root 952 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 1517 root 1472 S {hotplug-initd-o} /usr/bin/lua /usr/bin/hotplug-init 1579 root 1416 S /sbin/netifd 1707 root 3168 S shared-state-async peer 1774 root 1148 S /usr/sbin/crond -f -c /etc/crontabs -l 5 1800 root 980 S /usr/bin/netserver 1884 root 1136 S /usr/sbin/uhttpd -f -h /www -r LiMe-03dbc3 -x /cgi-b 2150 root 1052 S /usr/sbin/babeld -I -c /etc/babeld.conf -c /var/etc 2607 root 2176 S {ntpd} /sbin/ujail -t 5 -n ntpd -U ntp -G ntp -C /et 2629 ntp 1144 S /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0. 3060 root 2176 S {dnsmasq} /sbin/ujail -t 5 -n dnsmasq -u -l -e USER_ 3065 dnsmasq 1372 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c 3067 root 1348 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c 5650 root 972 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 5651 root 1160 S {lime-report} /bin/sh /bin/lime-report 5750 root 1160 S {lime-report} /bin/sh /bin/lime-report 5753 root 1152 R ps ### CMD ip address show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc fq_codel master br-lan state UP group default qlen 1000 link/ether 00:22:15:03:db:c3 brd ff:ff:ff:ff:ff:ff 3: wlan0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 14:cc:20:15:d6:5b brd ff:ff:ff:ff:ff:ff 4: wlan1: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether b0:48:7a:c9:49:ce brd ff:ff:ff:ff:ff:ff 5: br-lan: mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 00:22:15:03:db:c3 brd ff:ff:ff:ff:ff:ff inet 10.13.219.195/16 brd 10.13.255.255 scope global br-lan valid_lft forever preferred_lft forever inet6 fd0d:fe46:8ce8::3:dbc3/64 scope global valid_lft forever preferred_lft forever inet6 fe80::222:15ff:fe03:dbc3/64 scope link valid_lft forever preferred_lft forever 6: anygw@br-lan: mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether aa:aa:aa:0d:fe:aa brd ff:ff:ff:ff:ff:ff inet 10.13.0.1/16 brd 10.13.255.255 scope global anygw valid_lft forever preferred_lft forever inet6 fd0d:fe46:8ce8::1/64 scope global valid_lft forever preferred_lft forever inet6 fe80::a8aa:aaff:fe0d:feaa/64 scope link valid_lft forever preferred_lft forever 7: eth0_17@eth0: mtu 1496 qdisc noqueue state UP group default qlen 1000 link/ether 00:22:15:03:db:c3 brd ff:ff:ff:ff:ff:ff inet 10.13.219.195/32 brd 255.255.255.255 scope global eth0_17 valid_lft forever preferred_lft forever inet6 fe80::222:15ff:fe03:dbc3/64 scope link valid_lft forever preferred_lft forever 8: eth0_29@eth0: mtu 1496 qdisc noqueue master bat0 state UP group default qlen 1000 link/ether 02:95:39:03:db:c3 brd ff:ff:ff:ff:ff:ff inet6 fe80::95:39ff:fe03:dbc3/64 scope link valid_lft forever preferred_lft forever 9: bat0: mtu 1500 qdisc noqueue master br-lan state UNKNOWN group default qlen 1000 link/ether 76:e0:ad:87:c5:b6 brd ff:ff:ff:ff:ff:ff ### CMD ip route show 10.13.0.0/16 dev br-lan proto kernel scope link src 10.13.219.195 10.13.0.0/16 dev anygw proto static scope link metric 2147483647 ### CMD brctl show bridge name bridge id STP enabled interfaces br-lan 7fff.00221503dbc3 no eth0 bat0 ### CMD ip link show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc fq_codel master br-lan state UP mode DEFAULT group default qlen 1000 link/ether 00:22:15:03:db:c3 brd ff:ff:ff:ff:ff:ff 3: wlan0: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 14:cc:20:15:d6:5b brd ff:ff:ff:ff:ff:ff 4: wlan1: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether b0:48:7a:c9:49:ce brd ff:ff:ff:ff:ff:ff 5: br-lan: mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 00:22:15:03:db:c3 brd ff:ff:ff:ff:ff:ff 6: anygw@br-lan: mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether aa:aa:aa:0d:fe:aa brd ff:ff:ff:ff:ff:ff 7: eth0_17@eth0: mtu 1496 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 00:22:15:03:db:c3 brd ff:ff:ff:ff:ff:ff 8: eth0_29@eth0: mtu 1496 qdisc noqueue master bat0 state UP mode DEFAULT group default qlen 1000 link/ether 02:95:39:03:db:c3 brd ff:ff:ff:ff:ff:ff 9: bat0: mtu 1500 qdisc noqueue master br-lan state UNKNOWN mode DEFAULT group default qlen 1000 link/ether 76:e0:ad:87:c5:b6 brd ff:ff:ff:ff:ff:ff ### CMD df Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 6912 6912 0 100% /rom tmpfs 2017352 104 2017248 0% /tmp /dev/loop0 87865 111 80771 0% /overlay overlayfs:/overlay 87865 111 80771 0% / /dev/sda1 16084 5692 10068 36% /boot /dev/sda1 16084 5692 10068 36% /boot tmpfs 512 0 512 0% /dev ### CMD logread -l 20 Fri Dec 26 11:50:50 2025 authpriv.info dropbear[5014]: Exit (root) from : Disconnect received Fri Dec 26 11:51:00 2025 cron.err crond[1774]: USER root pid 5042 cmd ((sleep $((RANDOM % 120)); shared-state-async insert net-stats < /tmp/shared-state/network_statistics.json &> /dev/null)&) Fri Dec 26 11:51:10 2025 daemon.err shared-state-async[1707]: D 1766749870.410 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:51:10 2025 daemon.err shared-state-async[1707]: D 1766749870.410 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:51:21 2025 daemon.err babeld[2150]: Adding missing route to fd0d:fe46:8ce8::/64 (this shouldn't happen) Fri Dec 26 11:51:21 2025 daemon.err babeld[2150]: Adding missing route to 10.13.0.0/16 (this shouldn't happen) Fri Dec 26 11:51:23 2025 daemon.err shared-state-async[1707]: D 1766749883.805 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) net-stats got 1 significative changes out of 1 input slice size: 1 state size: 1 Fri Dec 26 11:51:23 2025 daemon.err shared-state-async[1707]: D 1766749883.855 std::task SharedState::notifyHooks(const std::string&, std::error_condition*) net-stats Fri Dec 26 11:51:40 2025 daemon.err shared-state-async[1707]: D 1766749900.844 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:52:00 2025 cron.err crond[1774]: USER root pid 5385 cmd ((for dataFile in /var/shared-state/data/* ; do shared-state bleach $(basename $dataFile .json); done &> /dev/null)&) Fri Dec 26 11:52:09 2025 daemon.err shared-state-async[1707]: D 1766749929.820 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:52:10 2025 authpriv.info dropbear[5422]: Child connection from fe80::8eae:4cff:fefe:194%anygw:58822 Fri Dec 26 11:52:11 2025 authpriv.info dropbear[5422]: Exit (root) from : Disconnect received Fri Dec 26 11:52:13 2025 authpriv.info dropbear[5631]: Child connection from fe80::8eae:4cff:fefe:194%anygw:58832 Fri Dec 26 11:52:13 2025 authpriv.info dropbear[5631]: Exit (root) from : Disconnect received Fri Dec 26 11:52:19 2025 authpriv.info dropbear[5650]: Child connection from fe80::8eae:4cff:fefe:194%anygw:50430 ### CMD logread | grep err Fri Dec 26 11:47:15 2025 daemon.notice procd: /etc/rc.d/S30shared-state-async: I 1766749635.712 bool SharedState::registerDataType(const std::string&, const std::string&, std::chrono::seconds, std::chrono::seconds, std::error_condition*) Config file: /tmp/shared-state/shared-state-async.conf corrupted or non-existent, creating a new one Fri Dec 26 11:47:15 2025 daemon.err shared-state-async[1707]: I 1766749635.726 std::task SharedStateCli::peer() Listening on TCP port: 3490 aFD: 0x7f5dbd853720 FD: 4 Fri Dec 26 11:47:15 2025 cron.err crond[1774]: crond (busybox 1.36.1) started, log level 5 Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio0 (1898): Syntax error: Unable to compile module '/usr/share/hostap/common.uc': Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio0 (1898): | Syntax error: Unable to resolve path for module 'nl80211' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio0 (1898): | Syntax error: Unable to resolve path for module 'rtnl' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio1 (1899): Syntax error: Unable to compile module '/usr/share/hostap/common.uc': Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio1 (1899): | Syntax error: Unable to resolve path for module 'nl80211' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio1 (1899): | Syntax error: Unable to resolve path for module 'rtnl' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio0 (1898): Syntax error: Unable to compile module '/usr/share/hostap/common.uc': Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio0 (1898): | Syntax error: Unable to resolve path for module 'nl80211' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio0 (1898): | Syntax error: Unable to resolve path for module 'rtnl' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio1 (1899): Syntax error: Unable to compile module '/usr/share/hostap/common.uc': Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio1 (1899): | Syntax error: Unable to resolve path for module 'nl80211' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio1 (1899): | Syntax error: Unable to resolve path for module 'rtnl' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio0 (1898): Syntax error: Unable to compile module '/usr/share/hostap/common.uc': Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio0 (1898): | Syntax error: Unable to resolve path for module 'nl80211' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio0 (1898): | Syntax error: Unable to resolve path for module 'rtnl' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio1 (1899): Syntax error: Unable to compile module '/usr/share/hostap/common.uc': Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio1 (1899): | Syntax error: Unable to resolve path for module 'nl80211' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio1 (1899): | Syntax error: Unable to resolve path for module 'rtnl' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio1 (1899): Syntax error: Unable to compile module '/usr/share/hostap/common.uc': Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio1 (1899): | Syntax error: Unable to resolve path for module 'nl80211' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio1 (1899): | Syntax error: Unable to resolve path for module 'rtnl' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio0 (1898): Syntax error: Unable to compile module '/usr/share/hostap/common.uc': Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio0 (1898): | Syntax error: Unable to resolve path for module 'nl80211' Fri Dec 26 11:47:15 2025 daemon.notice netifd: radio0 (1898): | Syntax error: Unable to resolve path for module 'rtnl' Fri Dec 26 11:47:16 2025 daemon.err babeld[2150]: Interface eth0_17 has no link-local address. Fri Dec 26 11:47:16 2025 daemon.err babeld[2150]: setsockopt(IPV6_LEAVE_GROUP): Address not available Fri Dec 26 11:47:16 2025 daemon.notice netifd: radio0 (1898): Syntax error: Unable to compile module '/usr/share/hostap/common.uc': Fri Dec 26 11:47:16 2025 daemon.notice netifd: radio0 (1898): | Syntax error: Unable to resolve path for module 'nl80211' Fri Dec 26 11:47:16 2025 daemon.notice netifd: radio0 (1898): | Syntax error: Unable to resolve path for module 'rtnl' Fri Dec 26 11:47:16 2025 daemon.notice netifd: radio1 (1899): Syntax error: Unable to compile module '/usr/share/hostap/common.uc': Fri Dec 26 11:47:16 2025 daemon.notice netifd: radio1 (1899): | Syntax error: Unable to resolve path for module 'nl80211' Fri Dec 26 11:47:16 2025 daemon.notice netifd: radio1 (1899): | Syntax error: Unable to resolve path for module 'rtnl' Fri Dec 26 11:47:16 2025 daemon.err babeld[2150]: Interface eth0_17 has no link-local address. Fri Dec 26 11:47:16 2025 daemon.err babeld[2150]: setsockopt(IPV6_LEAVE_GROUP): Address not available Fri Dec 26 11:47:16 2025 daemon.err babeld[2150]: send: Address not available Fri Dec 26 11:47:40 2025 daemon.err shared-state-async[1707]: D 1766749660.209 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.145 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 5 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: W 1766749666.195 static bool SharedState::collectStat(NetworkStats&, std::error_condition*) Discarding corrupted or empty statistics file: /tmp/shared-state/network_statistics.json Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.195 std::task SharedState::notifyHooks(const std::string&, std::error_condition*) bat-hosts Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.196 std::task asyncWrite(AsyncFileDescriptor&, const uint8_t*, std::size_t, std::error_condition*) aFD: 0x7f5dbd77a480 FD: 9 buffer: 0x7f5dbd828f00 len: 235 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.204 std::task SharedState::notifyHooks(const std::string&, std::error_condition*) Success executing hook: "/usr/share/shared-state/hooks/bat-hosts/shared-state-generate_bat_hosts" Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.245 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 0 input slice size: 0 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.345 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.395 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.515 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.565 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 0 input slice size: 0 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.616 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.666 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.715 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 0 input slice size: 0 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.776 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.825 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 0 input slice size: 0 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.875 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 0 input slice size: 0 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.935 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 0 input slice size: 5 state size: 5 Fri Dec 26 11:47:46 2025 daemon.err shared-state-async[1707]: D 1766749666.986 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:47:47 2025 daemon.err shared-state-async[1707]: D 1766749667.036 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:47:47 2025 daemon.err shared-state-async[1707]: D 1766749667.155 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:47:47 2025 daemon.err shared-state-async[1707]: D 1766749667.255 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 0 input slice size: 0 state size: 5 Fri Dec 26 11:47:54 2025 daemon.err shared-state-async[1707]: D 1766749674.545 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:48:00 2025 cron.err crond[1774]: USER root pid 3743 cmd ((sleep $((RANDOM % 120)); shared-state-async insert net-stats < /tmp/shared-state/network_statistics.json &> /dev/null)&) Fri Dec 26 11:48:00 2025 cron.err crond[1774]: USER root pid 3744 cmd ((for dataFile in /var/shared-state/data/* ; do shared-state bleach $(basename $dataFile .json); done &> /dev/null)&) Fri Dec 26 11:48:10 2025 daemon.err shared-state-async[1707]: D 1766749690.644 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:48:21 2025 daemon.err shared-state-async[1707]: D 1766749701.075 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:48:21 2025 daemon.err shared-state-async[1707]: D 1766749701.175 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 0 input slice size: 0 state size: 5 Fri Dec 26 11:48:21 2025 daemon.err shared-state-async[1707]: D 1766749701.275 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) bat-hosts got 0 significative changes out of 5 input slice size: 5 state size: 5 Fri Dec 26 11:48:39 2025 daemon.err shared-state-async[1707]: D 1766749719.620 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:49:10 2025 daemon.err shared-state-async[1707]: D 1766749750.054 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:49:10 2025 daemon.err shared-state-async[1707]: D 1766749750.054 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:49:40 2025 daemon.err shared-state-async[1707]: D 1766749780.484 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:49:44 2025 daemon.err shared-state-async[1707]: D 1766749784.805 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) net-stats got 1 significative changes out of 1 input slice size: 1 state size: 1 Fri Dec 26 11:49:44 2025 daemon.err shared-state-async[1707]: D 1766749784.855 std::task SharedState::notifyHooks(const std::string&, std::error_condition*) net-stats Fri Dec 26 11:50:00 2025 cron.err crond[1774]: USER root pid 4396 cmd ((sleep $((RANDOM % 120)); shared-state sync dnsmasq-leases &> /dev/null)&) Fri Dec 26 11:50:00 2025 cron.err crond[1774]: USER root pid 4397 cmd ((sleep $((RANDOM % 120)); shared-state sync babeld-hosts &> /dev/null)&) Fri Dec 26 11:50:00 2025 cron.err crond[1774]: USER root pid 4398 cmd ((sleep $((RANDOM % 120)); shared-state sync nodes_and_links &> /dev/null)&) Fri Dec 26 11:50:00 2025 cron.err crond[1774]: USER root pid 4402 cmd ((sleep $((RANDOM % 120)); shared-state sync dnsmasq-hosts &> /dev/null)&) Fri Dec 26 11:50:00 2025 cron.err crond[1774]: USER root pid 4405 cmd ((for dataFile in /var/shared-state/data/* ; do shared-state bleach $(basename $dataFile .json); done &> /dev/null)&) Fri Dec 26 11:50:00 2025 cron.err crond[1774]: USER root pid 4407 cmd ((sleep $((RANDOM % 120)); shared-state-multiwriter sync reference_state_nodes_info &> /dev/null)&) Fri Dec 26 11:50:00 2025 cron.err crond[1774]: USER root pid 4410 cmd ((sleep $((RANDOM % 120)); shared-state-multiwriter sync reference_state_wifi_links_info &> /dev/null)&) Fri Dec 26 11:50:09 2025 daemon.err shared-state-async[1707]: D 1766749809.460 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:50:39 2025 daemon.err shared-state-async[1707]: D 1766749839.435 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:51:00 2025 cron.err crond[1774]: USER root pid 5042 cmd ((sleep $((RANDOM % 120)); shared-state-async insert net-stats < /tmp/shared-state/network_statistics.json &> /dev/null)&) Fri Dec 26 11:51:10 2025 daemon.err shared-state-async[1707]: D 1766749870.410 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:51:10 2025 daemon.err shared-state-async[1707]: D 1766749870.410 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:51:21 2025 daemon.err babeld[2150]: Adding missing route to fd0d:fe46:8ce8::/64 (this shouldn't happen) Fri Dec 26 11:51:21 2025 daemon.err babeld[2150]: Adding missing route to 10.13.0.0/16 (this shouldn't happen) Fri Dec 26 11:51:23 2025 daemon.err shared-state-async[1707]: D 1766749883.805 std::task SharedState::merge(const std::string&, const std::map, StateEntry>&, const sockaddr_storage&, std::error_condition*) net-stats got 1 significative changes out of 1 input slice size: 1 state size: 1 Fri Dec 26 11:51:23 2025 daemon.err shared-state-async[1707]: D 1766749883.855 std::task SharedState::notifyHooks(const std::string&, std::error_condition*) net-stats Fri Dec 26 11:51:40 2025 daemon.err shared-state-async[1707]: D 1766749900.844 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic Fri Dec 26 11:52:00 2025 cron.err crond[1774]: USER root pid 5385 cmd ((for dataFile in /var/shared-state/data/* ; do shared-state bleach $(basename $dataFile .json); done &> /dev/null)&) Fri Dec 26 11:52:09 2025 daemon.err shared-state-async[1707]: D 1766749929.820 ReturnType AwaitableSyscall::await_resume() [with SyscallOp = ConnectOperation; ReturnType = int; bool multiShot = false; ReturnType errorValue = -1] syscall failed on resume mReturnValue: -1 error: 111 Connection refused category: generic ### CMD iw phy Wiphy phy1 wiphy index: 1 max # scan SSIDs: 4 max scan IEs length: 2257 bytes max # sched scan SSIDs: 0 max # match sets: 0 Retry short limit: 7 Retry long limit: 4 Coverage class: 3 (up to 1350m) Device supports AP-side u-APSD. Device supports T-DLS. Available Antennas: TX 0x3 RX 0x3 Configured Antennas: TX 0x3 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * monitor * mesh point * P2P-client * P2P-GO * outside context of a BSS Band 1: Capabilities: 0x11ee HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 Frequencies: * 2412 MHz [1] (19.0 dBm) * 2417 MHz [2] (19.0 dBm) * 2422 MHz [3] (19.0 dBm) * 2427 MHz [4] (19.0 dBm) * 2432 MHz [5] (19.0 dBm) * 2437 MHz [6] (19.0 dBm) * 2442 MHz [7] (19.0 dBm) * 2447 MHz [8] (19.0 dBm) * 2452 MHz [9] (19.0 dBm) * 2457 MHz [10] (19.0 dBm) * 2462 MHz [11] (19.0 dBm) * 2467 MHz [12] (19.0 dBm) * 2472 MHz [13] (19.0 dBm) * 2484 MHz [14] (disabled) valid interface combinations: * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1, total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz } HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing max # scan plans: 1 max scan plan interval: -1 max scan plan iterations: 0 Supported extended features: * [ RRM ]: RRM * [ FILS_STA ]: STA FILS (Fast Initial Link Setup) * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211 * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs * [ SCAN_RANDOM_SN ]: use random sequence numbers in scans * [ SCAN_MIN_PREQ_CONTENT ]: use probe request with only rate IEs in scans * [ AIRTIME_FAIRNESS ]: airtime fairness scheduling * [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support * [ DEL_IBSS_STA ]: deletion of IBSS station support * [ MULTICAST_REGISTRATIONS ]: mgmt frame registration for multicast * [ SCAN_FREQ_KHZ ]: scan on kHz frequency support * [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support Wiphy phy0 wiphy index: 0 max # scan SSIDs: 4 max scan IEs length: 2257 bytes max # sched scan SSIDs: 0 max # match sets: 0 Retry short limit: 7 Retry long limit: 4 Coverage class: 23 (up to 10350m) Device supports AP-side u-APSD. Device supports T-DLS. Available Antennas: TX 0x7 RX 0x7 Configured Antennas: TX 0x7 RX 0x7 Supported interface modes: * IBSS * managed * AP * AP/VLAN * monitor * mesh point * P2P-client * P2P-GO * outside context of a BSS Band 1: Capabilities: 0x11ef RX LDPC HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-23 Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) * 2472 MHz [13] (20.0 dBm) * 2484 MHz [14] (disabled) Band 2: Capabilities: 0x11ef RX LDPC HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-23 Frequencies: * 5180 MHz [36] (21.0 dBm) * 5200 MHz [40] (21.0 dBm) * 5220 MHz [44] (21.0 dBm) * 5240 MHz [48] (21.0 dBm) * 5260 MHz [52] (21.0 dBm) (radar detection) * 5280 MHz [56] (21.0 dBm) (radar detection) * 5300 MHz [60] (21.0 dBm) (radar detection) * 5320 MHz [64] (21.0 dBm) (radar detection) * 5500 MHz [100] (disabled) * 5520 MHz [104] (disabled) * 5540 MHz [108] (disabled) * 5560 MHz [112] (disabled) * 5580 MHz [116] (disabled) * 5600 MHz [120] (disabled) * 5620 MHz [124] (disabled) * 5640 MHz [128] (disabled) * 5660 MHz [132] (disabled) * 5680 MHz [136] (disabled) * 5700 MHz [140] (disabled) * 5745 MHz [149] (20.0 dBm) * 5765 MHz [153] (20.0 dBm) * 5785 MHz [157] (20.0 dBm) * 5805 MHz [161] (20.0 dBm) * 5825 MHz [165] (20.0 dBm) valid interface combinations: * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1, total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz } HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing max # scan plans: 1 max scan plan interval: -1 max scan plan iterations: 0 Supported extended features: * [ RRM ]: RRM * [ FILS_STA ]: STA FILS (Fast Initial Link Setup) * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211 * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs * [ SCAN_RANDOM_SN ]: use random sequence numbers in scans * [ SCAN_MIN_PREQ_CONTENT ]: use probe request with only rate IEs in scans * [ AIRTIME_FAIRNESS ]: airtime fairness scheduling * [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support * [ DEL_IBSS_STA ]: deletion of IBSS station support * [ MULTICAST_REGISTRATIONS ]: mgmt frame registration for multicast * [ SCAN_FREQ_KHZ ]: scan on kHz frequency support * [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support ### CMD iw dev wlan0-mesh station dump command failed: No such device (-19) ### CMD iw dev wlan1-mesh station dump command failed: No such device (-19) ### CMD iw dev wlan2-mesh station dump command failed: No such device (-19) ### CMD iw dev wlan0-mesh mpath dump command failed: No such device (-19) ### CMD iw dev wlan1-mesh mpath dump command failed: No such device (-19) ### CMD iw dev wlan2-mesh mpath dump command failed: No such device (-19) ### CMD iwinfo wlan0 ESSID: unknown Access Point: 14:CC:20:15:D6:5B Mode: Client Channel: unknown (unknown) HT Mode: NOHT Center Channel 1: unknown 2: unknown Tx-Power: 20 dBm Link Quality: unknown/70 Signal: unknown Noise: -46 dBm Bit Rate: unknown Encryption: unknown Type: nl80211 HW Mode(s): 802.11a/b/g/n Hardware: 168C:0030 168C:3112 [Atheros AR9380] TX power offset: none Frequency offset: none Supports VAPs: yes PHY name: phy0 wlan1 ESSID: unknown Access Point: B0:48:7A:C9:49:CE Mode: Client Channel: unknown (unknown) HT Mode: NOHT Center Channel 1: unknown 2: unknown Tx-Power: 19 dBm Link Quality: unknown/70 Signal: unknown Noise: unknown Bit Rate: unknown Encryption: unknown Type: nl80211 HW Mode(s): 802.11b/g/n Hardware: 168C:002D 168C:2099 [Generic MAC80211] TX power offset: unknown Frequency offset: unknown Supports VAPs: yes PHY name: phy1 ### CMD wifi status { "radio0": { "up": true, "pending": false, "autostart": true, "disabled": false, "retry_setup_failed": false, "config": { "path": "pci0000:00/0000:00:1c.1/0000:03:00.0", "channel": "48", "band": "5g", "htmode": "HT40", "distance": "10000", "noscan": "1", "noscan": true, "disabled": false }, "interfaces": [ { "section": "lm_wlan0_ap_radio0", "ifname": "wlan0-ap", "config": { "mode": "ap", "ifname": "wlan0-ap", "ssid": "LibreMesh.org", "mode": "ap", "network": [ "lan" ] }, "vlans": [ ], "stations": [ ] }, { "section": "lm_wlan0_apname_radio0", "ifname": "wlan0-apname", "config": { "mode": "ap", "ifname": "wlan0-apname", "ssid": "LibreMesh.org/LiMe-03dbc3", "mode": "ap", "network": [ "lan" ] }, "vlans": [ ], "stations": [ ] }, { "section": "lm_wlan0_mesh_radio0", "ifname": "wlan0-mesh", "config": { "mode": "mesh", "ifname": "wlan0-mesh", "mcast_rate": 6000, "mesh_fwding": false, "mesh_id": "LiMe", "mode": "mesh", "network": [ "lm_net_wlan0_mesh" ] }, "vlans": [ ], "stations": [ ] } ] }, "radio1": { "up": true, "pending": false, "autostart": true, "disabled": false, "retry_setup_failed": false, "config": { "path": "pci0000:00/0000:00:1e.0/0000:05:02.0", "channel": "11", "band": "2g", "htmode": "HT20", "distance": "1000", "noscan": "1", "noscan": true, "disabled": false }, "interfaces": [ { "section": "lm_wlan1_ap_radio1", "ifname": "wlan1-ap", "config": { "mode": "ap", "ifname": "wlan1-ap", "ssid": "LibreMesh.org", "mode": "ap", "network": [ "lan" ] }, "vlans": [ ], "stations": [ ] }, { "section": "lm_wlan1_apname_radio1", "ifname": "wlan1-apname", "config": { "mode": "ap", "ifname": "wlan1-apname", "ssid": "LibreMesh.org/LiMe-03dbc3", "mode": "ap", "network": [ "lan" ] }, "vlans": [ ], "stations": [ ] }, { "section": "lm_wlan1_mesh_radio1", "ifname": "wlan1-mesh", "config": { "mode": "mesh", "ifname": "wlan1-mesh", "mcast_rate": 24000, "mesh_fwding": false, "mesh_id": "LiMe", "mode": "mesh", "network": [ "lm_net_wlan1_mesh" ] }, "vlans": [ ], "stations": [ ] } ] } } ### CMD swconfig dev switch0 show /bin/lime-report: eval: line 13: swconfig: not found ### CMD fw4 print [!] Automatically including '/usr/share/lime/lime-proto-anygw_anycast-rules.nft' table inet fw4 flush table inet fw4 table inet fw4 { # # Defines # define lan_devices = { "br-lan", "anygw", "wlan0-mesh_29", "wlan0-mesh_17", "wlan1-mesh_29", "wlan1-mesh_17", "eth0_29", "eth0_17" } define lan_subnets = { 10.13.0.0/16, fd0d:fe46:8ce8::/64, 10.13.219.195 } define wan_devices = { } define wan_subnets = { } # # User includes # include "/etc/nftables.d/*.nft" # # Filter rules # chain input { type filter hook input priority filter; policy accept; iifname "lo" accept comment "!fw4: Accept traffic from loopback" ct state established,related accept comment "!fw4: Allow inbound established and related flows" tcp flags & (fin | syn | rst | ack) == syn jump syn_flood comment "!fw4: Rate limit TCP syn packets" iifname { "br-lan", "anygw", "wlan0-mesh_29", "wlan0-mesh_17", "wlan1-mesh_29", "wlan1-mesh_17", "eth0_29", "eth0_17" } jump input_lan comment "!fw4: Handle lan IPv4/IPv6 input traffic" } chain forward { type filter hook forward priority filter; policy accept; ct state established,related accept comment "!fw4: Allow forwarded established and related flows" iifname { "br-lan", "anygw", "wlan0-mesh_29", "wlan0-mesh_17", "wlan1-mesh_29", "wlan1-mesh_17", "eth0_29", "eth0_17" } jump forward_lan comment "!fw4: Handle lan IPv4/IPv6 forward traffic" } chain output { type filter hook output priority filter; policy accept; oifname "lo" accept comment "!fw4: Accept traffic towards loopback" ct state established,related accept comment "!fw4: Allow outbound established and related flows" oifname { "br-lan", "anygw", "wlan0-mesh_29", "wlan0-mesh_17", "wlan1-mesh_29", "wlan1-mesh_17", "eth0_29", "eth0_17" } jump output_lan comment "!fw4: Handle lan IPv4/IPv6 output traffic" } chain prerouting { type filter hook prerouting priority filter; policy accept; iifname { "br-lan", "anygw", "wlan0-mesh_29", "wlan0-mesh_17", "wlan1-mesh_29", "wlan1-mesh_17", "eth0_29", "eth0_17" } jump helper_lan comment "!fw4: Handle lan IPv4/IPv6 helper assignment" } chain handle_reject { meta l4proto tcp reject with tcp reset comment "!fw4: Reject TCP traffic" reject with icmpx type port-unreachable comment "!fw4: Reject any other traffic" } chain syn_flood { limit rate 25/second burst 50 packets return comment "!fw4: Accept SYN packets below rate-limit" drop comment "!fw4: Drop excess packets" } chain input_lan { jump accept_from_lan } chain output_lan { jump accept_to_lan } chain forward_lan { jump accept_to_wan comment "!fw4: Accept lan to wan forwarding" jump accept_to_lan } chain helper_lan { } chain accept_from_lan { iifname { "br-lan", "anygw", "wlan0-mesh_29", "wlan0-mesh_17", "wlan1-mesh_29", "wlan1-mesh_17", "eth0_29", "eth0_17" } counter accept comment "!fw4: accept lan IPv4/IPv6 traffic" } chain accept_to_lan { oifname { "br-lan", "anygw", "wlan0-mesh_29", "wlan0-mesh_17", "wlan1-mesh_29", "wlan1-mesh_17", "eth0_29", "eth0_17" } counter accept comment "!fw4: accept lan IPv4/IPv6 traffic" } chain input_wan { meta nfproto ipv4 udp dport 68 counter accept comment "!fw4: Allow-DHCP-Renew" meta nfproto ipv4 icmp type 8 counter accept comment "!fw4: Allow-Ping" meta nfproto ipv4 meta l4proto igmp counter accept comment "!fw4: Allow-IGMP" meta nfproto ipv6 udp dport 546 counter accept comment "!fw4: Allow-DHCPv6" ip6 saddr fe80::/10 icmpv6 type . icmpv6 code { 130 . 0, 131 . 0, 132 . 0, 143 . 0 } counter accept comment "!fw4: Allow-MLD" meta nfproto ipv6 icmpv6 type { 128, 129, 1, 3, 133, 134 } limit rate 1000/second counter accept comment "!fw4: Allow-ICMPv6-Input" meta nfproto ipv6 icmpv6 type . icmpv6 code { 2 . 0, 4 . 0, 4 . 1, 135 . 0, 136 . 0 } limit rate 1000/second counter accept comment "!fw4: Allow-ICMPv6-Input" jump reject_from_wan } chain output_wan { jump accept_to_wan } chain forward_wan { meta nfproto ipv6 icmpv6 type { 128, 129, 1, 3 } limit rate 1000/second counter accept comment "!fw4: Allow-ICMPv6-Forward" meta nfproto ipv6 icmpv6 type . icmpv6 code { 2 . 0, 4 . 0, 4 . 1 } limit rate 1000/second counter accept comment "!fw4: Allow-ICMPv6-Forward" meta l4proto esp counter jump accept_to_lan comment "!fw4: Allow-IPSec-ESP" udp dport 500 counter jump accept_to_lan comment "!fw4: Allow-ISAKMP" jump reject_to_wan } chain accept_to_wan { } chain reject_from_wan { } chain reject_to_wan { } # # NAT rules # chain dstnat { type nat hook prerouting priority dstnat; policy accept; } chain srcnat { type nat hook postrouting priority srcnat; policy accept; } chain srcnat_wan { meta nfproto ipv4 masquerade comment "!fw4: Masquerade IPv4 wan traffic" } # # Raw rules (notrack) # chain raw_prerouting { type filter hook prerouting priority raw; policy accept; } chain raw_output { type filter hook output priority raw; policy accept; } # # Mangle rules # chain mangle_prerouting { type filter hook prerouting priority mangle; policy accept; } chain mangle_postrouting { type filter hook postrouting priority mangle; policy accept; } chain mangle_input { type filter hook input priority mangle; policy accept; } chain mangle_output { type route hook output priority mangle; policy accept; } chain mangle_forward { type filter hook forward priority mangle; policy accept; iifname { "br-lan", "anygw", "wlan0-mesh_29", "wlan0-mesh_17", "wlan1-mesh_29", "wlan1-mesh_17", "eth0_29", "eth0_17" } tcp flags syn tcp option maxseg size set rt mtu comment "!fw4: Zone lan IPv4/IPv6 ingress MTU fixing" oifname { "br-lan", "anygw", "wlan0-mesh_29", "wlan0-mesh_17", "wlan1-mesh_29", "wlan1-mesh_17", "eth0_29", "eth0_17" } tcp flags syn tcp option maxseg size set rt mtu comment "!fw4: Zone lan IPv4/IPv6 egress MTU fixing" } } include "/usr/share/lime/lime-proto-anygw_anycast-rules.nft" ### CMD nft list ruleset table inet fw4 { chain input { type filter hook input priority filter; policy accept; iifname "lo" accept comment "!fw4: Accept traffic from loopback" ct state established,related accept comment "!fw4: Allow inbound established and related flows" tcp flags syn / fin,syn,rst,ack jump syn_flood comment "!fw4: Rate limit TCP syn packets" iifname { "anygw", "br-lan", "eth0_17", "eth0_29", "wlan0-mesh_17", "wlan1-mesh_17", "wlan0-mesh_29", "wlan1-mesh_29" } jump input_lan comment "!fw4: Handle lan IPv4/IPv6 input traffic" } chain forward { type filter hook forward priority filter; policy accept; ct state established,related accept comment "!fw4: Allow forwarded established and related flows" iifname { "anygw", "br-lan", "eth0_17", "eth0_29", "wlan0-mesh_17", "wlan1-mesh_17", "wlan0-mesh_29", "wlan1-mesh_29" } jump forward_lan comment "!fw4: Handle lan IPv4/IPv6 forward traffic" } chain output { type filter hook output priority filter; policy accept; oifname "lo" accept comment "!fw4: Accept traffic towards loopback" ct state established,related accept comment "!fw4: Allow outbound established and related flows" oifname { "anygw", "br-lan", "eth0_17", "eth0_29", "wlan0-mesh_17", "wlan1-mesh_17", "wlan0-mesh_29", "wlan1-mesh_29" } jump output_lan comment "!fw4: Handle lan IPv4/IPv6 output traffic" } chain prerouting { type filter hook prerouting priority filter; policy accept; iifname { "anygw", "br-lan", "eth0_17", "eth0_29", "wlan0-mesh_17", "wlan1-mesh_17", "wlan0-mesh_29", "wlan1-mesh_29" } jump helper_lan comment "!fw4: Handle lan IPv4/IPv6 helper assignment" } chain handle_reject { meta l4proto tcp reject with tcp reset comment "!fw4: Reject TCP traffic" reject comment "!fw4: Reject any other traffic" } chain syn_flood { limit rate 25/second burst 50 packets return comment "!fw4: Accept SYN packets below rate-limit" drop comment "!fw4: Drop excess packets" } chain input_lan { jump accept_from_lan } chain output_lan { jump accept_to_lan } chain forward_lan { jump accept_to_wan comment "!fw4: Accept lan to wan forwarding" jump accept_to_lan } chain helper_lan { } chain accept_from_lan { iifname { "anygw", "br-lan", "eth0_17", "eth0_29", "wlan0-mesh_17", "wlan1-mesh_17", "wlan0-mesh_29", "wlan1-mesh_29" } counter packets 91 bytes 8956 accept comment "!fw4: accept lan IPv4/IPv6 traffic" } chain accept_to_lan { oifname { "anygw", "br-lan", "eth0_17", "eth0_29", "wlan0-mesh_17", "wlan1-mesh_17", "wlan0-mesh_29", "wlan1-mesh_29" } counter packets 158 bytes 13702 accept comment "!fw4: accept lan IPv4/IPv6 traffic" } chain input_wan { meta nfproto ipv4 udp dport 68 counter packets 0 bytes 0 accept comment "!fw4: Allow-DHCP-Renew" icmp type echo-request counter packets 0 bytes 0 accept comment "!fw4: Allow-Ping" meta nfproto ipv4 meta l4proto igmp counter packets 0 bytes 0 accept comment "!fw4: Allow-IGMP" meta nfproto ipv6 udp dport 546 counter packets 0 bytes 0 accept comment "!fw4: Allow-DHCPv6" ip6 saddr fe80::/10 icmpv6 type . icmpv6 code { mld-listener-query . no-route, mld-listener-report . no-route, mld-listener-done . no-route, mld2-listener-report . no-route } counter packets 0 bytes 0 accept comment "!fw4: Allow-MLD" icmpv6 type { destination-unreachable, time-exceeded, echo-request, echo-reply, nd-router-solicit, nd-router-advert } limit rate 1000/second counter packets 0 bytes 0 accept comment "!fw4: Allow-ICMPv6-Input" icmpv6 type . icmpv6 code { packet-too-big . no-route, parameter-problem . no-route, nd-neighbor-solicit . no-route, nd-neighbor-advert . no-route, parameter-problem . admin-prohibited } limit rate 1000/second counter packets 0 bytes 0 accept comment "!fw4: Allow-ICMPv6-Input" jump reject_from_wan } chain output_wan { jump accept_to_wan } chain forward_wan { icmpv6 type { destination-unreachable, time-exceeded, echo-request, echo-reply } limit rate 1000/second counter packets 0 bytes 0 accept comment "!fw4: Allow-ICMPv6-Forward" icmpv6 type . icmpv6 code { packet-too-big . no-route, parameter-problem . no-route, parameter-problem . admin-prohibited } limit rate 1000/second counter packets 0 bytes 0 accept comment "!fw4: Allow-ICMPv6-Forward" meta l4proto esp counter packets 0 bytes 0 jump accept_to_lan comment "!fw4: Allow-IPSec-ESP" udp dport 500 counter packets 0 bytes 0 jump accept_to_lan comment "!fw4: Allow-ISAKMP" jump reject_to_wan } chain accept_to_wan { } chain reject_from_wan { } chain reject_to_wan { } chain dstnat { type nat hook prerouting priority dstnat; policy accept; } chain srcnat { type nat hook postrouting priority srcnat; policy accept; } chain srcnat_wan { meta nfproto ipv4 masquerade comment "!fw4: Masquerade IPv4 wan traffic" } chain raw_prerouting { type filter hook prerouting priority raw; policy accept; } chain raw_output { type filter hook output priority raw; policy accept; } chain mangle_prerouting { type filter hook prerouting priority mangle; policy accept; } chain mangle_postrouting { type filter hook postrouting priority mangle; policy accept; } chain mangle_input { type filter hook input priority mangle; policy accept; } chain mangle_output { type route hook output priority mangle; policy accept; } chain mangle_forward { type filter hook forward priority mangle; policy accept; iifname { "anygw", "br-lan", "eth0_17", "eth0_29", "wlan0-mesh_17", "wlan1-mesh_17", "wlan0-mesh_29", "wlan1-mesh_29" } tcp flags syn tcp option maxseg size set rt mtu comment "!fw4: Zone lan IPv4/IPv6 ingress MTU fixing" oifname { "anygw", "br-lan", "eth0_17", "eth0_29", "wlan0-mesh_17", "wlan1-mesh_17", "wlan0-mesh_29", "wlan1-mesh_29" } tcp flags syn tcp option maxseg size set rt mtu comment "!fw4: Zone lan IPv4/IPv6 egress MTU fixing" } } table bridge filter { chain forward_anygw { type filter hook forward priority filter; policy accept; ether daddr aa:aa:aa:00:00:00/24 counter packets 964 bytes 142742 drop } } table bridge nat { chain postrouting_anygw { type filter hook postrouting priority srcnat; policy accept; oifname "bat0" ether saddr aa:aa:aa:00:00:00/24 counter packets 6 bytes 912 drop oifname "bat0" icmpv6 type nd-router-solicit counter packets 0 bytes 0 drop oifname "bat0" icmpv6 type nd-router-advert counter packets 0 bytes 0 drop } } ### CMD opkg list-installed babeld - 1.13.1-1 babeld-auto-gw-mode - git-25.022.76367-a9488ae-1 bandwidth-test - 2024-12-10-1733846299 base-files - 1562-r24106-10cc5fcd00 batctl-default - 2023.1-3 bnx2-firmware - 20230804-1 busybox - 1.36.1-1 bwm-ng - 0.6.3-1 ca-bundle - 20241223-1 cgi-io - 2022-08-10-901b0f04-21 check-date-http - 2024-12-10-1733846299 check-internet - 2024-12-10-1733846299 dnsmasq-dhcpv6 - 2.90-2 dropbear - 2022.82-6 e2fsprogs - 1.47.0-2 ethtool - 6.3-1 firewall4 - 2023-09-01-598d9fbb-1 fstools - 2023-02-28-bfe882d5-1 fwtool - 2019-11-12-8f7fe925-1 getrandom - 2022-08-13-4c7b720b-2 grub2-bios-setup - 2.06-5 hostapd-common - 2023-09-08-e5ccbfc6-8 hotplug-initd-services - 2024-12-10-1733846299 ip-tiny - 6.3.0-1 iperf3 - 3.17.1-4 iputils-ping - 20211215-2 iw - 5.19-1 iwinfo - 2023-07-01-ca79f641-1 jansson4 - 2.14-3 jq - 1.6-2 jshn - 2023-05-23-75a3b870-1 jsonfilter - 2025-04-18-8a86fb78-1 kernel - 5.15.167-1-59d1431675acc6823a33c7eb2323daeb kmod-amazon-ena - 5.15.167-1 kmod-amd-xgbe - 5.15.167-1 kmod-ath - 5.15.167+6.1.110-1-1 kmod-ath9k - 5.15.167+6.1.110-1-1 kmod-ath9k-common - 5.15.167+6.1.110-1-1 kmod-atl1e - 5.15.167-1 kmod-batman-adv - 5.15.167+2023.1-7 kmod-bnx2 - 5.15.167-1 kmod-button-hotplug - 5.15.167-3 kmod-cfg80211 - 5.15.167+6.1.110-1-1 kmod-crypto-aead - 5.15.167-1 kmod-crypto-ccm - 5.15.167-1 kmod-crypto-cmac - 5.15.167-1 kmod-crypto-crc32c - 5.15.167-1 kmod-crypto-ctr - 5.15.167-1 kmod-crypto-gcm - 5.15.167-1 kmod-crypto-gf128 - 5.15.167-1 kmod-crypto-ghash - 5.15.167-1 kmod-crypto-hash - 5.15.167-1 kmod-crypto-hmac - 5.15.167-1 kmod-crypto-manager - 5.15.167-1 kmod-crypto-md5 - 5.15.167-1 kmod-crypto-null - 5.15.167-1 kmod-crypto-rng - 5.15.167-1 kmod-crypto-seqiv - 5.15.167-1 kmod-crypto-sha512 - 5.15.167-1 kmod-e1000 - 5.15.167-1 kmod-e1000e - 5.15.167-1 kmod-forcedeth - 5.15.167-1 kmod-fs-vfat - 5.15.167-1 kmod-hwmon-core - 5.15.167-1 kmod-i2c-algo-bit - 5.15.167-1 kmod-i2c-core - 5.15.167-1 kmod-igb - 5.15.167-1 kmod-igc - 5.15.167-1 kmod-input-core - 5.15.167-1 kmod-ixgbe - 5.15.167-1 kmod-lib-crc16 - 5.15.167-1 kmod-lib-crc32c - 5.15.167-1 kmod-libphy - 5.15.167-1 kmod-mac80211 - 5.15.167+6.1.110-1-1 kmod-macvlan - 5.15.167-1 kmod-mdio - 5.15.167-1 kmod-mdio-devres - 5.15.167-1 kmod-mii - 5.15.167-1 kmod-nf-conntrack - 5.15.167-1 kmod-nf-conntrack6 - 5.15.167-1 kmod-nf-flow - 5.15.167-1 kmod-nf-log - 5.15.167-1 kmod-nf-log6 - 5.15.167-1 kmod-nf-nat - 5.15.167-1 kmod-nf-reject - 5.15.167-1 kmod-nf-reject6 - 5.15.167-1 kmod-nfnetlink - 5.15.167-1 kmod-nft-bridge - 5.15.167-1 kmod-nft-core - 5.15.167-1 kmod-nft-fib - 5.15.167-1 kmod-nft-nat - 5.15.167-1 kmod-nft-offload - 5.15.167-1 kmod-nls-base - 5.15.167-1 kmod-nls-cp437 - 5.15.167-1 kmod-nls-iso8859-1 - 5.15.167-1 kmod-nls-utf8 - 5.15.167-1 kmod-phy-realtek - 5.15.167-1 kmod-pps - 5.15.167-1 kmod-ptp - 5.15.167-1 kmod-r8169 - 5.15.167-1 kmod-random-core - 5.15.167-1 kmod-tg3 - 5.15.167-1 libatomic1 - 12.3.0-4 libblkid1 - 2.39-2 libblobmsg-json20230523 - 2023-05-23-75a3b870-1 libc - 1.2.4-4 libcomerr0 - 1.47.0-2 libext2fs2 - 1.47.0-2 libf2fs6 - 1.16.0-1 libgcc1 - 12.3.0-4 libiperf3 - 3.17.1-4 libiwinfo-data - 2023-07-01-ca79f641-1 libiwinfo-lua - 2023-07-01-ca79f641-1 libiwinfo20230701 - 2023-07-01-ca79f641-1 libjson-c5 - 0.16-3 libjson-script20230523 - 2023-05-23-75a3b870-1 liblua5.1.5 - 5.1.5-11 liblucihttp-lua - 2023-03-15-9b5b683f-1 liblucihttp-ucode - 2023-03-15-9b5b683f-1 liblucihttp0 - 2023-03-15-9b5b683f-1 libmbedtls12 - 2.28.10-1 libmnl0 - 1.0.5-1 libncurses6 - 6.4-2 libnftnl11 - 1.2.6-1 libnl-tiny1 - 2023-07-27-bc92a280-1 libpcap1 - 1.10.4-1 libpthread - 1.2.4-4 librt - 1.2.4-4 libsmartcols1 - 2.39-2 libss2 - 1.47.0-2 libstdcpp6 - 12.3.0-4 libubox-lua - 2023-05-23-75a3b870-1 libubox20230523 - 2023-05-23-75a3b870-1 libubus-lua - 2023-06-05-f787c97b-1 libubus20230605 - 2023-06-05-f787c97b-1 libuci-lua - 2023-08-10-5781664d-1 libuci20130104 - 2023-08-10-5781664d-1 libuclient20201210 - 2023-04-13-007d9454-1 libucode20230711 - 2024-07-11-1a8a0bcf-3 libustream-mbedtls20201210 - 2023-02-25-498f6e26-1 libuuid1 - 2.39-2 lime-app - v0.2.26-2 lime-debug - 2024-12-10-1733846299 lime-docs - 2024-12-10-1733846299 lime-docs-minimal - 2024-12-10-1733846299 lime-hwd-ground-routing - 2024-12-10-1733846299 lime-hwd-openwrt-wan - 2024-12-10-1733846299 lime-proto-anygw - 2024-12-10-1733846299 lime-proto-babeld - git-25.022.76367-a9488ae lime-proto-batadv - git-25.022.76367-a9488ae lime-proto-wan - git-25.022.76367-a9488ae lime-report - 2024-12-10-1733846299 lime-system - 2024-12-10-1733846299 logd - 2022-08-13-4c7b720b-2 lua - 5.1.5-11 luci-base - git-25.222.75657-7ce34fe luci-compat - git-25.222.75657-7ce34fe luci-lib-base - git-25.222.75657-7ce34fe luci-lib-httpclient - git-25.222.75657-7ce34fe luci-lib-httpprotoutils - git-25.222.75657-7ce34fe luci-lib-ip - git-25.222.75657-7ce34fe luci-lib-jsonc - git-25.222.75657-7ce34fe luci-lib-nixio - git-25.222.75657-7ce34fe luci-lua-runtime - git-25.222.75657-7ce34fe mkf2fs - 1.16.0-1 mtd - 26 mtr-nojson - 0.95-3 netifd - 2024-01-04-c18cc79d-2 netperf - 2.7.0-3 nftables-json - 1.0.8-1 odhcp6c - 2023-05-12-bcd28363-20 opkg - 2022-02-24-d038e5b6-2 partx-utils - 2.39-2 procd - 2023-06-25-2db83655-2 procd-seccomp - 2023-06-25-2db83655-2 procd-ujail - 2023-06-25-2db83655-2 pv - 1.6.6-1 r8169-firmware - 20230804-1 rpcd - 2023-07-01-c07ab2f9-1 rpcd-mod-file - 2023-07-01-c07ab2f9-1 rpcd-mod-iwinfo - 2023-07-01-c07ab2f9-1 rpcd-mod-luci - 20240305-1 rpcd-mod-ucode - 2023-07-01-c07ab2f9-1 safe-reboot - 2024-12-10-1733846299 shared-state - 2024-12-10-1733846299 shared-state-async - 2024-12-10-1733846299 shared-state-babeld_hosts - 2024-12-10-1733846299 shared-state-bat_hosts - 2024-12-10-1733846299 shared-state-dnsmasq_hosts - 2024-12-10-1733846299 shared-state-dnsmasq_leases - 2024-12-10-1733846299 shared-state-nodes_and_links - 2024-12-10-1733846299 sprunge - 2024-12-10-1733846299 tcpdump-mini - 4.99.4-1 terminfo - 6.4-2 ubox - 2022-08-13-4c7b720b-2 ubus - 2023-06-05-f787c97b-1 ubus-lime-groundrouting - 2024-12-10-1733846299 ubus-lime-location - 2024-12-10-1733846299 ubus-lime-metrics - 2024-12-10-1733846299 ubus-lime-utils - 2024-12-10-1733846299 ubusd - 2023-06-05-f787c97b-1 uci - 2023-08-10-5781664d-1 uclient-fetch - 2023-04-13-007d9454-1 ucode - 2024-07-11-1a8a0bcf-3 ucode-mod-fs - 2024-07-11-1a8a0bcf-3 ucode-mod-html - 1 ucode-mod-lua - 1 ucode-mod-math - 2024-07-11-1a8a0bcf-3 ucode-mod-ubus - 2024-07-11-1a8a0bcf-3 ucode-mod-uci - 2024-07-11-1a8a0bcf-3 uhttpd - 2023-06-25-34a8a74d-2 uhttpd-mod-lua - 2023-06-25-34a8a74d-2 uhttpd-mod-ubus - 2023-06-25-34a8a74d-2 urandom-seed - 3 urngd - 2023-11-01-44365eb1-1 usign - 2020-05-23-f1f65026-1 watchping - 2024-12-10-1733846299 wireless-regdb - 2025.07.10-1